AFK Farming: Setup and Routines

Set up the built-in Macro for AFK farming in Anime Crusaders: loop stages, queue routines, auto-clear challenges, and recover from disconnects.

AFK farming in Anime Crusaders runs on the game's built-in Macro, a feature that sits inside the match screen and plays stages for you. You choose units, placement areas, upgrade timing and a run mode; the Macro deploys, upgrades, sells and re-enters stages on its own. From there, loops, routines and Auto Challenge turn a single unattended session into a steady trickle of clears, currency and drops.

The setup below walks through each panel in the order you actually need it, so you can go from opening the Macro for the first time to leaving a queue running overnight without babysitting the screen.

What "AFK" means in Anime Crusaders

AFK play here is not a separate idle mode with a claim button. It is the Macro standing in for your clicks during a real match. That distinction matters because everything you would normally do by hand — placing a farm first, upgrading on a schedule, switching to anti-air when Flying enemies appear, selling a unit that has outlived its usefulness — has a corresponding setting you need to fill in before you walk away.

The Macro also handles the parts of farming that are pure routine: retrying a failed stage, moving to the next stage after a win, picking cards, and clearing daily challenge categories. Once configured, the match button changes to Macro On and a floating panel reports the current task and run status.

Set up your first AFK session

Follow this order and you will not have to backtrack through the settings menus.

  1. Enter the stage you want to farm.
  2. Click Macro on the right side of the match screen.
  3. Fill in your unit slots, including bindings, placement limits and placement areas.
  4. Open Run and pick This Stage, Loop or Routine.
  5. Set Optimisation while macroing to a level your computer can handle. Choose Extreme first if the machine is very weak, then step down to High or Medium once you confirm the run stays stable.
  6. Press start, then confirm the floating panel shows the task you expect.

If you plan to repeat the same stage, use Loop together with Retry in the Match settings so a loss does not end the session.

Choose the right run mode

Run modeWhat it doesBest for
This StageOne run of the current stageTesting a new slot configuration
LoopRepeats the current stageSingle-stage resource farming
RoutineFollows a configured task queueMixed farming across several stages

Loop is the default AFK choice because it requires the least setup — one stage, one team, one set of placement zones. Routine is the better long-term answer when you want a specific stage run a fixed number of times before the Macro moves on.

Build unit slots that survive an unattended run

Open Macro → Units → Slots. There are six unit slots plus an H Hero slot. Fill My Team pulls your equipped team into the preset, and Rename lets you label it so you can tell one setup from another.

Each slot identifies its unit in one of two ways:

  • Follow the team position uses whatever unit currently occupies that team slot. The Macro configuration travels with the position, not the unit.
  • Lock to This Unit attaches the slot to a specific unit and allows up to five replacements, so the setup follows that unit even when your team order changes.

Lock to This Unit is usually safer for a farming preset you want to keep. If you swap units around between sessions, Follow the team position can silently move a carefully tuned zone onto a unit that should not be standing there.

Per-slot controls worth setting

Switch on Slot enabled for every slot you want the Macro to use, then set Targeting, Auto upgrade, Auto abilities and Placement limit. Placement limit is the one players most often skip: if a unit allows multiple copies and you only want one, set the limit to one and the Macro stops at a single copy.

Advanced tab timing

SettingWhat it controls
Place from waveThe first wave the slot may deploy
Place through waveThe last wave the slot may deploy
Upgrade priorityOrder in which this slot's upgrades are bought relative to others
Maximum upgradeThe upgrade cap for this slot
Abilities from waveThe wave where automatic ability use begins

Two of these do real work in an AFK build. Maximum upgrade lets you stop before a later upgrade changes an attack shape you want to keep — for example, holding at a cone AoE instead of advancing into a full AoE. Abilities from wave reserves automatic ability use for the part of the stage that matters; if your plan needs a time stop from wave 14, set the field to 14 and the Macro waits.

Placement: zones, shared area and recordings

Open Macro → Units → Placement and choose Zones or Recording.

Slot-specific zones

  1. Select Zones under Placement mode.
  2. Open the slot you want, go to its Zones tab and click Add Zone.
  3. Drag the zone preview to the spot on the map you want.
  4. Resize it with the mouse wheel or the minus and plus controls.

Slot zones let individual units use their own positions instead of the shared area. This is how you keep a farm in the back and a damage dealer on the path in the same run.

Shared area and map helpers

In the global Placement panel, Shared area → Set on Map picks the fallback location, and Reset clears it. The same panel holds Unit radius, Show the circles while playing, Auto skip waves and Smart placement on new maps. Turn on the circle display while you are still tuning — it shows exactly where the Macro intends to place units.

Recordings

Under Units → Recordings you can capture a run with Record or Next Run, check This map for the current map's recording status, and open Manage to browse your saved recordings. Select Recording as the placement mode and the Macro learns where your units stood.

Queue stages with a Routine

A Routine is a task queue, and it is the cleanest way to farm several things in one AFK block.

  1. Open Macro → Routine and click New or New Routine.
  2. Pick the routine from the selector, then Add Task.
  3. Choose the task's Mode, World, Act and Difficulty.
  4. Set Play until to Runs and enter a target count.
  5. Add further tasks and reorder them with the up and down controls. Delete controls remove a task.
  6. Choose When it ends → Repeat if the queue should restart automatically.
  7. Use Set as Start for the opening task, or Play from Here to begin at a selected task.
  8. Select Routine in Run to activate queue-based automation.

A single task might request five runs of Story → Planet Namak → Act 1 — Evil Elegance → Normal. A mixed queue can put three Raid runs ahead of ten Story runs, so each stage keeps its own place in the sequence instead of overwriting the last.

Keep daily resources flowing with Auto Challenge

Daily, weekly and rotating challenge categories are where a lot of a player's routine income sits, and the Macro can cover them without a separate session. Open Macro → Dailies → Challenges and work through the list.

CategoryControl
Daily ChallengeOn/off switch
Weekly ChallengeOn/off switch
Resource ChallengeRequested clear count
Boost ChallengeRequested clear count
Elemental ChallengeRequested clear count
Weekly TowerOn/off switch

Use the minus and plus controls to set clear counts for Resource, Boost and Elemental, and watch the displayed clears remaining today so you do not queue more than the game allows.

Timing and team selection

Expand When and choose Play them → When ready or After a loop. When ready prioritizes challenges as soon as they are available; After a loop defers them until the current loop finishes. Review Use them up before the reset and the reset countdown so nothing is wasted, and hit Refresh to update the display.

Expand Preset & team to pick defaults for the challenge runs. The routine's preset reuses your farming setup, while Your current team uses whatever you have equipped. Each of the six categories can also have its own preset and team, so a challenge that needs a different composition does not force you to weaken your farm.

Finally, switch on the Auto Challenge master switch. Selecting categories alone does not enable it — the master switch is separate.

Handle losses without being there

Open Macro → Settings → Match → Loop. Under When a match ends, pick Retry to repeat the same stage or Next to progress. Restart at wave sets a wave-based restart point.

For repeated failures, expand Smart losses, enable it, set Losses in a row, then choose Skip the task or Use a backup. Skipping is the right call in a routine: the queue moves past the stage that keeps failing and the rest of the session still pays out.

Card priorities for easier clears

Open Settings → Cards for Card auto pick and Priority. Reorder categories with the arrows. For an ease-first farming setup, this order keeps combat comfortable:

PriorityCategory
1Damage
2Cooldown
3Range
4Enemy Shield
5Enemy Speed
6Enemy Health

That ordering prefers damage, cooldown and range over the harder enemy modifiers that come with currency bonuses — a reasonable trade when you want consistent clears rather than risky payouts. In a lobby with card voting, your priority is simply your automatic preference. For Einz's Boons, enable Auto Start, Auto Replay or Auto Next so the game remembers the last card and Small Army choices on the next run.

Monitor the session without hovering

Open Macro → Settings → Display → In-match overlay and configure Show the overlay, Compact, Show the circles while playing and Session summary. The floating panel displays the current stage, run status and task, and you can drag it out of the way. It also shows what the Macro is saving toward — a Speedcart setup, for example, moves from saving 550 Yen to deploy to saving 2,500 Yen for Upgrade 3 — plus elapsed time and the next reset countdown on a 24-hour cycle.

Discord webhook notifications are worth setting up for long sessions: run summaries and rare-drop alerts arrive in a channel, so you only need to check in when something notable happens.

Recover from disconnects and AFK protection

An unattended session will occasionally leave the stage. The Macro is built to come back:

  • Return to the lobby pauses the Macro rather than ending it.
  • Internet interruption triggers automatic reconnection and sends you back into the game.
  • Server updates show a stage transfer message and route the player back through the lobby into the stage.
  • AFK-protection rejoin moves you to a fresh server and continues Macro operation.
  • Auto Retry handles portal automation by selecting the next portal on its own.

Use Auto Retry for repeated attempts on the same content and Auto Next when you want progression. In multiplayer lobbies, the overlay shows a FOLLOWING HOST status alongside Pause, Stop and Open controls.

Common AFK mistakes

  • Leaving the Auto Challenge master switch off while assuming selected categories are running.
  • Building a Loop around one stage but forgetting Retry, so a single loss ends the session.
  • Using Follow the team position on a tuned slot, then changing team order and breaking the zone.
  • Setting no Placement limit on a unit that allows multiple copies, and letting the Macro over-deploy.
  • Choosing an optimisation level your machine cannot sustain instead of starting at Extreme and working down.

FAQ

Does AFK farming need a third-party program? No. Everything described here runs through the Macro panel inside the match screen.

Can I farm several stages in one AFK block? Yes. Build a Routine, set a run count for each task, and enable Repeat if you want the queue to cycle.

What happens if my internet drops mid-run? The Macro reconnects automatically and returns you to the game. A server update sends you back through the lobby to the stage, and AFK protection rejoins you on a new server with the Macro still running.

How do I know what the Macro is saving for? The floating overlay names the current saving target, such as deploying a unit or affording its next upgrade, so you can tell whether a run is progressing or stalled.